LIBERTY ANCHORS™
The DFS Liberty Anchor was designed for anchoring
and through-bolting into hollow walls,
ceilings and other blind space applications.
Liberty Anchor - Male Version
(External Thread) (Solid Body)
|
| Item Number |
Dia. x
Total Length |
Thread Length |
Box Qty. |
| 38600TM |
3/8 x 6 |
4 |
50 |
Male Version
Solid Anchor Body
(Drill Same Hole Diameter
as Anchor Diameter)
T-Anchors comply with these industry standards:
- Meets G.S.A. Standards G.S.A. FF-B-588C
- Meets load factors in compliance with A.N.S.I. A58.1
- Meets plating standards in compliance with A.S.T.M. B-633
- Products tested in accordance with A.S.T.M. E-488.88
|
| Test Performance Data |
| Liberty Male |
Pull-Out |
Shear |
| 3/8 x 6 |
1800 lbs. |
3000 lbs. |
A safety factor of 4:1, or 25% of ultimate, should be used. Critical applications (vibratory loads, overhead installations, etc.) may require a safety factor of as much as 10:1 or more. |
Liberty Anchor - Female Version
(External Thread) (Solid Body) |
| Item Number |
Diameter |
Drill Size |
Box Qty. |
Minimum
Grip Range |
| 38000TF |
3/8 |
1/2 |
50 |
1 1/2" |
| 12000TF |
1/2 |
5/8 |
50 |
1 5/8" |
Female Version
USS Internally Threaded
T-Anchors comply with these industry standards:
- Meets G.S.A. Standards G.S.A. FF-B-588C
- Meets load factors in compliance with A.N.S.I. A58.1
- Meets plating standards in compliance with A.S.T.M. B-633
- Products tested in accordance with A.S.T.M. E-488.88
|
| Test Performance Data |
| Liberty Female |
Pull-Out |
Shear |
| 3/8 |
3200 lbs. |
* |
| 1/2 |
5800 lbs. |
* |
A safety factor of 4:1, or 25% of ultimate, should be used. Critical applications (vibratory loads, overhead installations, etc.) may require a safety factor of as much as 10:1 or more. |
Liberty Male
- USS course threaded
- Gravity-activated toggle head
- Drill same hole diameter as diamter
- Zinc & dichromate plated for corrosion resistance
- Nuts and washers included
|
Liberty Female
- Internally threaded USS coarse
- Will accept any length threaded rod
- Gravity accuated toggle head
- For "Thru-Bolting" heavy objects to concrete block walls
- Zinc & diachromate plated for corrosion resistance
|
What advantages are there?
Libertys are much stronger than toggle bolts and may also be removed when necessary
Liberty female allows you to produce a thru-bolt anchor up to 12 feet long!
Installation Procedure
- DRILL HOLE PROPER SIZE THROUGH OBJECT BEING FASTENED AND THROUGH WALL, CEILING, ETC.
- INSERT WITH NUT AND WASHER ATTACHED TO ANCHOR, THROUGH ALL MATERIAL. (Anchor can be used inside "blind" hollow walls, ceilings, etc.
- TURN ROD 180 DEGREES, GRAVITY ACTIVATED RETAINING BAR WILL TURN SECURING THE ANCHOR
- SIMPLY TIGHTEN THE NUT TO FASTEN OBJECT. (The retaining bar turns only one direction, so turning the rod back to it's original position will allow you to remove the anchors.
Where do I use Liberty Anchors?
• Anchoring to Crawl Spaces
• Railings to Block Walls
• Thru-Bolting Applications
•
Heavy Racks & Shelving to Block Walls
• Deck Headers Through Block Walls
• Pipe Hangers
• Anchoring to Steel Barns
|
