CONCRETE NAILS
 The DFS Concrete Nails are used for fastening wood, steel, plastic or insulation to poured concrete, block & brick.
| NAILS |
| Item Number |
Length |
Drill Size |
Box Qty. |
| 36112CN |
1 1/2" |
3/16" |
100 / 1000 |
| 36200CN |
2" |
3/16" |
100 / 1000 |
| 36212CN |
2 1/2" |
3/16" |
100 / 1000 |
| 36300CN |
3" |
3/16" |
100 / 1000 |
| 36312CN |
3 1/2" |
3/16" |
100 / 1000 |
| 36400CN |
4" |
3/16" |
100 / 1000 |
DFS Concrete Nails meet these industry standards:
• Factory Mutual System Approval (#4470)
• Metro Dade County Approval
• Made in USA
Coating Specs:
Mechanical Galvanized (Sliver) meets: ASTM b695 spec., Type 1 Class 12 requirements.
Application Specs:
Predrill a 3/16" Pilot Hole through object and into concrete. Drive Concrete Nail with a 2lb. hammer until fluch with object. Minimum Embedment = 1"
DFS Concrete Nail Length Selection:
Minimum Embedment = 1" |
DFS Concrete Nails
• High shear strength
• Fluted body allows a higher pull-out
• Fast & Easy to use
What advantages are there?
DFS Concrete Nails are low cost alternative for light duty fastening to all masonry materials. (A 3/16" dia. masonry drill bit and a 2lb. hammer are all that you need to install.)
DFS Concrete Nails are available in 100ct boxes with drill bits...or bulk without drill bits. |
Where do I use Concrete Nails? |
• Anchoring insulation to concrete
• Wood & Steel Plates to concrete
• Plywood to block walls
• To prevent objects from "sliding" on masonry materials |
|
