ISO 9001:2008 CERTIFIED

    » CUSTOM MANUFACTURING
 

SLEEVE ANCHORS


Designed for applications which
require high pull-out values at a
reasonable cost. Easy to install
.




DFS Sleeve Anchors - Stud Head   Test Data

Item Number
Diameter x
Total Length


Box Qty

 
Min. Emb.

Pull-Out

Shear
14138SL 1/4 X 1 3/8" 100   1" 1300 1500
141214SL 1/4 X 2 1/4" 100   1" 1300 1500
56112SL 5/16 X 1 1/2" 100   1" 1700 2000
56212SL 5/16 X 2 1/2" 100   1" 1700 2000
38178SL 3/8 X 1 7/8 " 50   1 1/4" 2400 3000
38300SL 3/8 X 3 " 50   1 1/4" 2400 3000
38400SL 3/8 X 4" 50   1 1/4" 2400 3000
12214SL 1/2 X 2 1/4" 50   1 1/2" 4700 5200
12300SL 1/2 X 3 " 25   1 1/2" 4700 5200
12400SL 1/2 X 4" 25   1 1/2" 4700 5200
12600SL 1/2 X 6 " 25   3" 4700 5200
58214SL 5/8 X 2 1/4" 25   2" 5900 10100
58300SL 5/8 X 3 " 25   2" 5900 10100
58414SL 5/8 X 4 1/4" 10   3 1/2" 5900 10100
58458SL 5/8 X 4 5/8 " 10   3 1/2" 5900 10100
58600SL 5/8 X 6 " 10   3 1/2" 5900 10100
34212SL 3/4 X 2 1/2" 10   2" 9200 15000
34414SL 3/4 X 4 1/4" 5   3 1/2" 9200 15000
34614SL 3/4 X 6 1/4" 5   3 1/2" 9200 15000
             
DFS Sleeve Anchors - Flat Head
14200SL 1/4 X 2 " 100   1" 1300 1500
14300SL 1/4 X 3 " 100   1 1/4" 1300 1500
14400SL 1/4 X 4" 100   1 1/4" 1300 1500
38234SL 3/8 X 2 3/4" 50   1 1/4" 2400 3000
38401SL 3/8 X 4" 50   1 1/4" 2400 3000
38500SL 3/8 X 5 " 50   2 1/2" 2400 3000
38600SL 3/8 X 6 " 50   3" 2400 3000


A safety factor of 4:1, or 25% of ultimate, should be used. Critical applications (vibratory loads, overhead installations, etc.) may require a safety factor of as much as 10:1 or more.
Meets or exceeds U.S. Government G.S.A. Specification FF-S-325, Group II, Type 3, Class 3
All tests were conducted in 3500 psi concrete





What advantages are there?
Sleeve Anchors can be used near the edge of poured concrete floors and steps with a reduced risk of cracking or "blowing out" the concrete.

No oversize hole is required for sleeve anchors. Drill the same hole diameter as the anchor diameter.

Flush mount anchoring can be achieved with "Flat head" style sleeve anchors.

  • For use in all masonry media
  • High pull-out strength
  • Can be used in a bottomless hole
  • 2 varieties of head styles
  • Available in open stock boxes or bulk


Installation Procedure

Drill hole deeper than
embedment using an A.N.S.I.
approved drill bit. Same
diameter as the anchor
diameter.
Tap anchor into hole with nut and washer attached. Tighten nut 3-5 turns until anchor wedges securely.


Where do I use DFS Sleeve Anchors:

• Steel & Wood Plates
• Outlet Boxes
•  Mail Boxes
• Guard Rails
• Grain & Storage Bins
• Steel Buildings
• Shelving & Bracing

• Stadium Seating
• Sign Bases
• Hand Rails
• Light Fixtures
• Machine Anchoring
• Water & Gas Meters
• Storage Tanks

• Pipe Hanger Mounts
• Phone Booths
• Headers
• Dock Bumpers
• Equipment Racks
• Conveyor Belt Mounts
• Manhole Applications

 
 
Diversified Fastening Systems, Inc
501 Richings St.
Charles City, Iowa 50616
1.800.833.6417